Best Boat Fuel Sending Unit And Gauge in 2022 [*Top Picks*]

6262 Reviews Scanned

• Bestseller #1

  Moeller Marine 035722-10, Fuel Tank Sending Unit, Electric 6 to 12 Inch Tank Depth (386)

  Calibrated to the Industry Standard of 33-240 Ohms Requires connection to a dash mounted gauge Internal components will not rust or corrode Complete with 5 hole gasket and screws

  Check Price
• Bestseller #1

  Rupse Fuel Sender Unit Boat Fuel Tank Sending Unit Fuel Water Level Sensor Stainless Steel Fuel Sender and Fuel Gauge for Boat Car Truck RV (6" (150mm)) (341)

  [High Precision and Long Life]: The exterior is made of stainless steel, and the interior is controlled by high-quality reed switches. The sensor is corrosion-resistant, does not rust, has a long life, stable output signal, and accurate measurement. Suitable for gasoline, diesel, water, methanol, etc. [Easy to Read]: The fuel level gauge has 8 adjustable backlight colors, IP67 waterproof, stainless steel frame, anti-fog curved glass, easy to read (Empty-1/2-Full). [Easy Installation]: SAE 5 hole mounting pattern, NBR material gasket, good sealing performance, high oil resistance, with M5 5 screws, 10 quick wiring terminals, easy and quick installation by referring to the wiring diagram. [Multi-Size]: Various sizes can be selected to meet different sizes of fuel tanks for Automobiles, Ships, Yachts, RV, Agricultural vehicles and Industrial equipment. Note: To allow the sender not hit the bottom of the tank, the length of sender should be 1" less than the depth of the tank if tank is plastic, and 0.5" less than the depth of the tank if tank is metal .

  Check Price
• Bestseller #1

  SEACHOICE 15461 Marine 6-Inch to 12-Inch Gas or Diesel Fuel Electric Sending Unit Kit (132)

  Provides accurate fuel level information Suitable Tank Depth: 6 to 12 inches Can be used for gas or diesel Compatible with 35 to 240 ohm gauges Includes mounting screws and gasket

  Check Price
• Bestseller #1

  100TECH Fuel Sending Unit 240-33 ohms 11"(280mm） Marine for Boat Vehicle Truck RV Fuel Tank Sending Unit Fuel Water Level Sending Unit Fuel Gas Sender Fuel Water Level Sensor Fuel Gauge Sending Unit (41)

  100TECH Stainless Steel Fule Tank Sending Unit is Made With OKI Reed Switch(Imported from Japan). It is the Direct Replacement for Arm Type sender. The Advantage of This Fuel Level Sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability.
  Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.
  The Fule/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full). If you Need Lengths Other than 4"-24", Please Contact us Directly for More Information.
  [Easy to Install] The Fuel Level Sending Unit Comes with Gasket,Mounting Screws,Well-Written and Illustrated instructions; The Wiring Instructions are Straight Forward and Easy to follow.
  SAE 5 hole Mounting Pattern, Heavy Duty 316 Stainless Steel and Rugged Construction. Wide Application: It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto.
  [The Size of Float] The Diameter of Float is 1.38"(35mm). If You Have to Drill the hole, Diameter 1.50"(38mm) Hole Would be Perfect.

  Check Price
• Bestseller #1

  2 Inch (52mm) Digital LED Fuel Level Gauge Meter with Fuel Sensor E-1/2-F Pointer Electric Universal Car Pointer Meter Universal Fuel Gauge Automobile Boat (203)

  12 volt compatible. Well-suited with nearly every street car or race car electrical system Gauge diameter: 2''/52mm, White LED background light, Accurate Traditional incandescent lighting illuminates around the perimeter of the dial High sensitivity and easy operation, Easy to install, Attached the detailed instructions. You will like the design and the ease of the tool. Stainless steel shell with glass top, well made and durable,not easy to rust

  Check Price
• Bestseller #1

  Marine Fuel Sending Unit 240-33ohms 8" Fuel Gas Tank Sender Boat Fuel Level Gauge Sensor Fuel Tank Sending Unit Fuel Water Level Sensor (200mm) for Car Truck Boat Fuel Gauge Water Lever Gauge (121)

  The Fuel Level Sensor Comes with 1pc of Cork Gasket,5pcs of Mounting Screws. Take about 15 Minutes to Intstall Total! Fuel Sending Unit SAE 5 hole Mounting Pattern, Heavy Duty 316 Stainless Steel and Rugged Construction. The Fule/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full，Non-Linear Output).. Boat Fuel Gauge Sensor Length range: 200MM; 300MM ; 350MM; 450MM . Output signal: 0-190ohm or 230-33ohm (Please choose one length range & signal you need when placing the order ) . Fuel Gas Tank Lever Sender Wide Application: For Use in Diesel, Fuel, Gasoline, Water, OEM Replacement. It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto.

  Check Price
• Bestseller #1

  ARTILAURA 240-33ohms 8" (200mm) Fuel Sending Unit, Marine Fuel Sending Unit for Boat, Stainless Steel Fuel Tank Sender Gas Water Fuel Gauge Sensor for Boat Car Truck Vehicle (26)

  🚗[Material]: Fuel tank sending unit is made with heavy duty 316 stainless steel. This water level sensor is reed switch, durability and reliability, steady output signal. No adjustment needed for tank. 🚘[Wide Application]: The fuel level sender is suitable for Boat, Auto,Trucks, Buses and Marine field. Fit for Fuel Level Gauge,Water Level Gauge and any kinds of liquids without impurities. 🚙[American Standard Output]: Length range of fuel sender to choose: 5 inch-12inch. The Fule/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full). The fuel sending unit comes with 1 x Sensor, 1 x Gasket, 5 x Screws and 1 x instructions. 🚌[Easy to Install]: SAE 5 hole mounting pattern, easy to install and hookup.The well-written and illustrated instructions are straight forward that will easy to follow. ⭐⭐⭐⭐⭐[Attention]: 1 inch(25mm) clearance must be maintained between the tank bottom and the float retaining collar in addition to adjacent side or baffle of tank. Please contact us if you are dissatisfied with our products, the response will be taken in 24 hours and provide proper solutions.

  Check Price
• Bestseller #1

  240-33ohm 9" Fuel Sending Unit Marine Fuel Level Gauge Sender Stainless Steel Fuel Gas Tank Sensor 5 Holes for Fuel & Water Gauge Boat Car Lever Gas Tank Sending Units (225mm) (121)

  MATERIAL: The fuel sending unit is made of high quality 316 stainless steel which is durable and intends for long service life,it also has anti-vibration, anti-explosion funtion. The Fuel sending unit comes with gasket, mounting screws, Takes about 15 minutes to install total, getting the fuel gauge working again. Sensor LENGTH RANGE : 225mm - 8.9" inch ; Output signal: 240~33 ohm (240~33 ohm sensor fit for 240~33 ohm fuel gauge.) Level Sensor Support Water Level Gauge and Fuel Level Gauge for Boat Car RV Truck . Installation Connetion：Blue wire--ground(-) ，Brown wire--Instrument signal wire

  Check Price
• Bestseller #1

  Marine Fuel Sending Unit 10" 240-33 ohms Boat Fuel Level Gauge Sensor Fuel Tank Sending Units Fuel Gas Tank Sender (250mm) for Fuel Lever Gague & Water Lever Gauge Gas Water Tank Sensor Sender (121)

  Fuel tank sending unit is made with heavy duty 316 stainless steel. This water level sensor is reed switch, durability and reliability, steady output signal. Marine Fuel Sending Unit Mounting Methods: Standard SAE 5 hole pattern . The Fule/Water Level Gauge Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full). Gas Tank Sending Unit Length range: 200MM; 250MM ; 300MM ; 350MM; 450MM . Output signal: 0-190ohm or 230-33ohm (Please choose one length range & signal you need when placing the order ) . The fuel level sender is suitable for Boat, Auto,Trucks, Buses and Marine field. Fit for Fuel Level Gauge,Water Level Gauge and any kinds of liquids without impurities.

  Check Price
• Bestseller #1

  52mm Marine Fuel Gauge 240-33ohm Boat Fuel Gauge 0-190ohm 0-180ohm Signal Adjustable Waterproof Fuel Gas Tank Gauge Lever Meters E-F with 7 Colors Backlight for Motorcycle Boat Car Truck 9-32V (121)

  Marine Fuel Gauges IP67 waterproof and Dustproof grade, 316 Stainless Steel Bezel for long-term use even in acid-base and humid environment . Fuel Lever Gauge Input signal Adjustable: 0~190ohm、0~180ohm、10~180ohm、240~33ohm、240~30ohm Fuel Tank Gauge Install diameter: Φ52mm or 2-1/16'', Indication range: E~F, Working voltage: 9-32v dc [ fit 12V-24V Vehicle or Engine]. With ultra-wide working voltage design (long-term operating voltage:9-32v,maximum up to:36v) Boat Fuel Gauge is Designed to Measure & Display the Amount of gas or Fuel in Your Boat or Vehicle's Gas Tank, Can be used for the engines/generating units,ships,construction machinery,agricultural machinery,automotive modification etc. Motorcycle Fuel Gauge 7 Color Backlight Adjustment : red、yellow、orange、green、blue、purple、white, you can choose which one you want color that press the gauge back button

  Check Price

Also read Ball joint swivel base Also read Bruins puck Also read Pk2 by packit Also read 27hp kohler command